 |
| Quantity: | |
|---|---|
What is Threaded Tee
As one of the most common pipe fittings, threaded tee is used to combine or divide fluid flow. Usually it is a fitting in which the side inlet pipe enters at a 90-degree angle, or an angle other than 90 degrees.
Class 6000 Threaded tee fittings are known for their T shape. And they feature three branches: one in the middle and two on the both side. With the center branch being perpendicular to the side branches, tee fittings are shaped like the letter T.
Tees can connect pipes of different diameters, change the direction of a pipe run, or both. Available in various materials, sizes and finishes, they may also be used to transport two-fluid mixtures.
What is the Difference Between Male Thread and Female Thread Fitting
Male thread fitting-a male thread has the grooves known as the thread on the outside (externally).
Female thread fitting-a female thread has the grooves known as the thread on the inside (internally).
Class Rating of Threaded Tee
Class 2000lbs;
Class 3000lbs;
Class 6000lbs.
What is the Material of Threaded Fittings
Carbon steel: | ASTM A105 |
Low temperature steel: | A350 LF2/3 |
Pipeline steel: | A694 F42/46/52/56/60/65/70 |
Alloy steel: | A182 F5/9/11/12/22/91/92 |
Stainless Steel: | A182 F304/316/317/310S/321/347/904L |
Weight Chart of Class 6000 Threaded Tee
Nominal Size | Class | |
DN | NPS | 6000 |
6 | 1/8 | 0.35 |
8 | 1/4 | 0.57 |
10 | 3/8 | 0.66 |
15 | 1/2 | 1.15 |
20 | 3/4 | 1.80 |
25 | 1 | 2.25 |
32 | 1-1/4 | 3.95 |
40 | 1-1/2 | 4.87 |
50 | 2 | 8.89 |
65 | 2-1/2 | 12.8 |
80 | 3 | 21.6 |
100 | 4 | 29.5 |
Dimensions of Class 6000 Threaded Tee
NPS | Min Length of Thread | Outside Dia of Band | Center to End | Min | |
B | J | ||||
1/2 | 10.9 | 13.6 | 46 | 38 | 8.15 |
3/4 | 12.7 | 13.9 | 56 | 44 | 8.53 |
1 | 14.7 | 17.3 | 62 | 51 | 9.93 |
1.1/4 | 17 | 18 | 75 | 60 | 10.59 |
1.1/2 | 17.8 | 18.4 | 84 | 64 | 11.07 |
2 | 19 | 19.2 | 102 | 83 | 12.09 |
2.1/2 | 23.6 | 28.9 | 121 | 95 | 15.29 |
3 | 25.9 | 30.5 | 146 | 106 | 16.64 |
4 | 27.7 | 33 | 152 | 114 | 18.67 |
Inspection
Visual the surface of pipe tee body, such as dents, die marks, porosity, undercuts etc.
Check the marking such as size, material code, material grade, thickness, heat No.
Measure the dimensions such as outside diameter, thickness, length of thread.
Test threads of threaded tee with Go/no Go Gauge.
What is Threaded Tee
As one of the most common pipe fittings, threaded tee is used to combine or divide fluid flow. Usually it is a fitting in which the side inlet pipe enters at a 90-degree angle, or an angle other than 90 degrees.
Class 6000 Threaded tee fittings are known for their T shape. And they feature three branches: one in the middle and two on the both side. With the center branch being perpendicular to the side branches, tee fittings are shaped like the letter T.
Tees can connect pipes of different diameters, change the direction of a pipe run, or both. Available in various materials, sizes and finishes, they may also be used to transport two-fluid mixtures.
What is the Difference Between Male Thread and Female Thread Fitting
Male thread fitting-a male thread has the grooves known as the thread on the outside (externally).
Female thread fitting-a female thread has the grooves known as the thread on the inside (internally).
Class Rating of Threaded Tee
Class 2000lbs;
Class 3000lbs;
Class 6000lbs.
What is the Material of Threaded Fittings
Carbon steel: | ASTM A105 |
Low temperature steel: | A350 LF2/3 |
Pipeline steel: | A694 F42/46/52/56/60/65/70 |
Alloy steel: | A182 F5/9/11/12/22/91/92 |
Stainless Steel: | A182 F304/316/317/310S/321/347/904L |
Weight Chart of Class 6000 Threaded Tee
Nominal Size | Class | |
DN | NPS | 6000 |
6 | 1/8 | 0.35 |
8 | 1/4 | 0.57 |
10 | 3/8 | 0.66 |
15 | 1/2 | 1.15 |
20 | 3/4 | 1.80 |
25 | 1 | 2.25 |
32 | 1-1/4 | 3.95 |
40 | 1-1/2 | 4.87 |
50 | 2 | 8.89 |
65 | 2-1/2 | 12.8 |
80 | 3 | 21.6 |
100 | 4 | 29.5 |
Dimensions of Class 6000 Threaded Tee
NPS | Min Length of Thread | Outside Dia of Band | Center to End | Min | |
B | J | ||||
1/2 | 10.9 | 13.6 | 46 | 38 | 8.15 |
3/4 | 12.7 | 13.9 | 56 | 44 | 8.53 |
1 | 14.7 | 17.3 | 62 | 51 | 9.93 |
1.1/4 | 17 | 18 | 75 | 60 | 10.59 |
1.1/2 | 17.8 | 18.4 | 84 | 64 | 11.07 |
2 | 19 | 19.2 | 102 | 83 | 12.09 |
2.1/2 | 23.6 | 28.9 | 121 | 95 | 15.29 |
3 | 25.9 | 30.5 | 146 | 106 | 16.64 |
4 | 27.7 | 33 | 152 | 114 | 18.67 |
Inspection
Visual the surface of pipe tee body, such as dents, die marks, porosity, undercuts etc.
Check the marking such as size, material code, material grade, thickness, heat No.
Measure the dimensions such as outside diameter, thickness, length of thread.
Test threads of threaded tee with Go/no Go Gauge.
